Twice-Yearly HVAC Tune-Up & Inspection

Ensure peak performance and extend the life of your system with our comprehensive twice-a-year HVAC inspection, tune-up, and cleaning services

Furnace

  • Inspect and tighten all electrical connections and terminals.
  • Remove, clean, and adjust main gas burners.
  • Remove, clean, and adjust ignition/pilot assembly.
  • Thoroughly brush and vacuum clean the heat exchanger(s) and combustion chambers.
  • Inspect heat-exchanger(s) & combustion chambers for cracks, rusting, or problem areas.
  • Vacuum out blower compartment; return airdrop, and surrounding area (no duct cleaning and to pull blower is extra).
  • Inspect the flue assembly.
  • Test flue gas drafting mechanism.
  • Test and inspect all furnace safety controls.
  • Test, record and adjust gas pressure.
  • Replace or clean standard air filters (filters extra).
  • Lubricate all fan motors and all moving parts.
  • Measure and adjust blower for correct airflow.
  • Adjust all dampers and set proper blower speed(s).
  • Clean, level, test, and calibrate thermostat.
  • Inspect and test thermocouple output as well as pilot safety switch.
  • Measure and record electrical voltage, amperage, and component resistance.
  • Inspect and test all system transformers, relays, contactors, and controls.
  • Measure performance.

Air Conditioner

  • Chemically clean and thoroughly wash condenser coil(s).
  • Thoroughly clean or replace standard air-filter(s).
  • Wash and level condensing unit for proper motor and bearing wear.
  • Lubricate motor and fan bearings as well as other moving parts as necessary.
  • Clean and inspect evaporator coil and drain pan when readily accessible.
  • Clean and inspect condensate drain lines and fittings.
  • Clean, level, and calibrate thermostat.
  • Adjust and thoroughly clean blower motor and fan assembly as needed.
  • Inspect, tighten and test all electrical connections. This includes disconnect switch.
  • Inspect all cooling system electrical wires, connectors, and terminals.
  • Test system starting and running capacitors.
  • Test all controls, switches, relays, transformers, contactors, motors, and fans.
  • Measure starting and running amperes, line voltage and control voltage.
  • Test system-starting capabilities.
  • Inspect and adjust all safety controls.
  • Monitor refrigerant pressures and temperatures.
  • Test and record super-heat and sub-cooling. Compare with factory specifications.
  • Adjust metering control device per factory/manufactures recommendations.
  • Test and measure air conditioning system for proper production and capacity.
  • Monitor fan motors and compressor operating temperatures.

Short-Term and Long-Term Benefits of HVAC Maintenance

A well-maintained car uses less gas, and a well-maintained HVAC system uses less electricity or fuel. When we maintain your system, we’ll make calibration adjustments and other quick fixes that will maximize your system’s efficiency and effectiveness. You’ll start to see the difference on your next utility bill. We’ve found that over time, an Energy Savings Agreement can largely pay for itself in those energy savings alone.

Our maintenance services are about much more than energy efficiency, though. Maintenance allows us to catch and repair small problems before they can get first, preventing future repairs that could be significantly more expensive. Moreover, investing in maintenance extends the overall lifespan of your system, saving you even more down the road on an early replacement.


HVAC maintenance isn’t just a way to save money; it gets you peace of mind. In the middle of a sweltering July heatwave or frigid January ice storm, it’s comforting to know that an experienced HVAC professional has checked out your system and confirmed that everything is working properly. You have enough to worry about as a homeowner; we’re here to make sure climate control is the least of those worries.

Share by: